Automatic & Semi-Automatic Welders
Leister UNIFLOOR E Automatic Welder
The UNIFLOOR E is the automatic tool of choice for welding flooring made of PVC-P, PE, linoleum, and other modified thermoplastics. Complete with separate airflow, temperature, and speed controls, and a digital display with set and actual values the UNIFLOOR E gives you complete control over the welding process.
- Welding rod de-reeler and trolley attachment included
- Drive speed of up to 7.5 metres per minute (24.6 ft/min), depending on material
- Temperature adjustable from 80-620°C (176-1148°F)
- Automatic and constant temperature adjustment independent of voltage fluctuations and environmental conditions
- Reproducible welding parameters thanks to digital display
- Easily weld most floor coverings without re-configuring the machine
- Automatic start to avoid damage to materials
- Compact, handy design
- Electrically certified for use in Canada
Leister MINIFLOOR Drive Unit Only
Includes only the MINIFLOOR drive unit for use with your existing TRIAC hot air hand tool. The MINIFLOOR drive unit turns your TRIAC into an automatic welder in seconds. Ideal for short joints and small projects, the MINIFLOOR increases weld quality while nearly doubling welding speed compared to manual welding.
- Welding speed of about 2 m/min. (6.5 ft/min.) - double the speed of manual welding!
- Long guide arm ensures straight welds
- Fits in tight spaces: 51 mm (2 in.) of wall clearance and 29.5 cm (11.6 in.) of height clearance needed
- Lightweight and easy to move
- Automatic start-up with adjustable delay
- TRIAC power supply integrated in the MINIFLOOR drive unit
- Compatible with all TRIAC models
- Electrically certified for use in Canada: the MINIFLOOR is modified by STANMECH to meet the standards required for certification under the Canadian Electrical Code
- TRIAC and nozzles not included
Leister MINIFLOOR with TRIAC ST Semi-Automatic Welder
- Welding speed of about 2 m/min. (6.5 ft/min.) - double the speed of manual welding!
- Long guide arm ensures straight welds
- Fits in tight spaces: 51 mm (2 in.) of wall clearance and 29.5 cm (11.6 in.) of height clearance needed
- Lightweight and easy to move
- Automatic start-up with adjustable delay
- TRIAC power supply integrated in the MINIFLOOR drive unit
- Compatible with all TRIAC models
- Electrically certified for use in Canada: the MINIFLOOR is modified by STANMECH to meet the standards required for certification under the Canadian Electrical Code
- Speed welding nozzle not included
Hand Tool Kits
Leister TRIAC ST Flooring Kit
- Simple operation
- Temperature adjustable from 40-700°C (104-1292°F)
- New handle design improves grip
- Better weight distribution reduces fatigue
- Actively cooled heater tube sleeve for greater worker safety
- Automatic shut-off when carbon brushes are worn to prevent motor damage
- cULus approved
- Includes:
- TRIAC ST 120V / 1.6kW
- 5mm tubular nozzle
- 5mm speed welding nozzle
- Hand grooving tool
- Spatula & trimming guide
- Tool box
Leister TRIAC AT Flooring Kit
- Digital display shows precise value of temperature and level of air flow selected; warnings such as undervoltage, replace carbon brushes soon, and tool overheated included on display
- Cool down mode with automatic shut-off
- Independent temperature and air flow control
- Automatic and constant temperature adjustment independent of voltage fluctuations and environmental conditions
- Temperature adjustable from 40-620°C (104-1148°F)
- New handle design improves grip
- Better weight distribution reduces fatigue
- Automatic shut-off when carbon brushes are worn to prevent motor damage
- cULus approved
- Includes:
- TRIAC AT 120V / 1.6kW
- 5mm tubular nozzle
- 5mm speed welding nozzle
- Hand grooving tool
- Spatula & trimming guide
- Tool box
Weldy Energy HT1600 Flooring Kit
- Simple operation
- Actively cooled heater tube sleeve for greater worker safety
- Variable temperature control up to 700°C
- Ceramic heating element
- Robust brush motor
- Electrically certified for use in Canada
- Includes:
- WELDY Energy HT1600 120V / 1.6kW
- 5mm tubular nozzle
- 4mm speed welding nozzle
- 5mm speed welding nozzle
- Hand grooving tool
- Spatula & trimming guide
Grooving Tools
Leister GROOVER Automatic Grooving Machine
The GROOVER is purpose-built to groove tough flooring materials like those made of PVC-P, PE, and linoleum. It glides on three rollers and cuts to a uniform grooving depth even at high speeds.
- Works with all types of flooring
- Two speed settings
- Easy and safe to use
- Adjustable guide roller keeps tracking straight
- Dust-free use thanks to fan & dust collection bag
- Compact design allows grooving close to walls
- Includes 3.5 mm (0.14 in.) tungsten carbide-tipped blade with trapezium profile
- Electrically certified for use in Canada
**This tool currently requires 2-4 weeks for delivery**
Leister GROOVY Hand Groover
The new GROOVY is a lightweight, handy tool for grooving floor coverings made of PVC or linoleum. Its ergonomic shape makes it easy to use. Designed to be used in small spaces, the GROOVY can be used to groove close to walls or other obstacles.
- Lightweight and handy
- Groove preparation without milling
- Create clean transitions from machine-milled grooves to edges of flooring
- Ideal for surfaces that are small and difficult to access
- Guide roller ensures a straight groove
- Comes with 3.5 mm wide blade, 2.5 mm wide blade available separately
- Adjustable groove depth
- Ideal companion to the GROOVER automatic machine
**This tool currently requires 2-4 weeks for delivery**
Nozzles
Leister 5 mm Tubular Nozzle
Fits all models of TRIAC. Use for freehand welding or to attach a speed welding nozzle.
Leister Speed Welding Nozzles
Leister speed welding nozzles offer top-of-the-line quality. Available for 3, 4, or 5 mm welding rod with options for standard or narrow air path. Select a narrow path nozzle for sensitive flooring like linoleum. Requires a 5 mm tubular nozzle to adapt from heat gun.
Accessories
Leister "Mozart" Trimming Knife
- Five spare blades are included in the scope of delivery
- 0.6 mm universal spacer blade for PVC and linoleum included - eliminates the need to switch between the currently available PVC (0.5 mm) and linoleum blades (0.7 mm)
**This tool currently requires 2-4 weeks for delivery**